大眾T2遙控?zé)艄獍惭b教程

Vw T2 remote control light installation tutorial

燈光材料如圖

來到車尾，將紅色和橙色配件拆起

Lighting material as shown in figure

Go to the back of the car and remove the red and orange parts

拿出A包，將第一個紅燈放配件內安裝如圖

Take out bag A and put the first red light in the fittings as shown in the figure

相同方式安裝接下來的燈光如圖

將插頭導線穿到車身

Install the following lights in the same way as shown in the figure

Thread the plug wire to the body

拿出B包，將燈條安裝在車身兩側上

Take out Bag B and install the light strips on both sides of the body

拿出C包，將燈條貼于車子底部如圖

Take out package C and stick the light strip on the bottom of the car

as shown in the picture

拿出D包，將燈組安裝在車頭處如圖

拿出E包。將零件拆起

Take out the D package and install the light set at the front as

shown in the picture

Take out Package E. Remove the parts

將燈光安裝如圖

1

2

Install the lights as shown

將積木拆起,安裝另一側燈光如下

并將積木還原,把箭頭所指積木拆起

Remove the block and install the light on the other side as follows

And restore the block, remove the block pointed by the arrow

將導線藏于積木內如下

將插頭導線延車底穿過到車頭

Hide the wire in the blocks as follows

Run the plug wire under the car to the front

將導線拉到車身

將所有插頭插到連接板中

Pull the wire to the body

Insert all plugs into the connecting plate

電池充電

battery charge