哈利波特密室燈光安裝教程

Harry Potter Chamber of Secrets lighting installation tutorial

燈光如下

將積木分開出來

The lights are as follows

Separate the building blocks

拿出A包，將燈光組穿過積木如圖

將第一個燈光組安裝如下

Take out package a and pass the light group through the

building block, as shown in the figure

Install the Ding light group as follows:

將第二個燈光組安裝在第二層

第三個燈光組安裝在第三層

Install the second light group on the second floor

The third light group is installed on the third floor

最后一個安裝在頂部位置如圖

1

2

3

4

Most installed at the top, such as:

拿出B包，將積木安裝如下

Take out package B and install the building blocks as

shown in Fig

將剩下的積木穿到第二層安裝如下

Thread the remaining building blocks to the second floor

for installation, such as:

將導線延箭頭方向穿過安裝如圖

拿出C包，將積木安裝如下

Thread the wire in the direction of the arrow, as shown

in the figure

Take out package C and install the building blocks as shown

in Fig

剩下的導線穿過積木如圖將燈粒安裝如下

拿出D包，將2個燈光組安裝如下

The wire passes through the building block as shown in the figure

and the lamp particles are installed as shown in the figure

Take out package D and install 2 light groups as shown in

將多余導線藏于積木內

拿出E包，首先將燈條穿過積木

Hide the excess wires in the building blocks

Take out package e, first pass the light bar through the building

block

將燈條安裝在窗上如圖

最后將所有插口插入連接板內

Install the light strip on the window, as shown in the figure

Finally, insert all sockets into the connection board

可以將其放在如圖位置

It can be placed at the position shown in the figure