89128漢堡店燈光安裝教程

89128 Burger restaurant lighting installation tutorial

燈光材料如下

1

2 3

4

將漢堡店拆起

Lighting materials are as follows

Tear down the burger joint

拿出1號燈線如下

1

2

3

Take out light 1 wire as follows

拿出積木，將第1節4燈燈組安裝如下

Take out the building blocks and install the section 1

4 light group as follows

再拿出積木安裝第2節2燈燈組如下

Then take out the building blocks to install section

2 2 lights as follows

將白色積木件拆起

Remove the white blocks

把帶燈粒的配件安裝在積木上

安裝還原

Install the fitting with the light particle on the block

Install restore

拿出第2條燈線

1

2

3

4

5

6

7

拿出積木，將第1節4燈燈組安裝如下

Take out the second light wire

Take out the building blocks and install the section

1 4 light group as follows

把帶燈粒的導線延箭頭方向穿過

將白色積木件拆起

Run the wire with the light particle through the

arrow direction

Remove the white blocks

把帶燈粒的配件安裝在積木上

積木安裝還原

Install the fitting with the light particle on the block

Building block installation and restoration

把積木拆起

Building block installation and restoration

將剩下的兩個帶配件的燈粒安裝如下

Install the remaining two light particles with fittings

as follows

把積木拆起，將多余導線藏于積木內

Remove the blocks and hide the excess wires inside

the blocks

安裝剩下的燈光導線

Install the remaining light wires

1

2

3

4

拿出第3條燈線

Take out the third light wire

將4節燈組如圖安裝在積木上

積木安裝還原

Install the 4-section lamp group on the building

blocks as shown

Building block installation and restoration

拿出第4條燈線

1

2

3

將第1節4燈燈組安裝如下

Take out the fourth light wire

Install the Section 1 4 light group as follows

將積木拆起，把剩下的燈光導線穿過積木

Remove the blocks and thread the remaining light wires

through the blocks

拿出積木，把兩節4燈燈組安裝如下

積木安裝還原

Take out the building blocks and install the two 4-light

sets as follows

Building block installation and restoration

將所有燈線整理好固定在積木內

Arrange all the light wires and fix them in the

building blocks

接上電池盒如下

Attach the battery box as follows