與眾不同
降低內部容積可減少浪費，便于清
洗；不銹鋼螺栓可抗腐蝕，并能提
供合理的定位，便于重新裝配。
It can reduce the waste of resources by lower inner
capacity and is easy to clean; stainless bolt can resist
corrosion and provide reasonable position which is
convenient to reassemble.
耐磨的端軸承可確保閥桿的正確定
位，更換簡單。
Wear-resisting end step bearing ensures the
correct position of valve rod and is easy to
replace.
采用先導式空氣閥，消除停機現
象，所有氣閥零件的更換都不需要
打開內腔。
It adopts pilot-type air valve which can
eliminate the problem of shut-down and there
is no need to open internal cavity for the
replacement of all parts and to lubricate air
lines.
SUPERIORITIES
維護便利
Convenient Maintenance
精密配合的零件
Precisely artLocated Parts
整個結構堅固耐用、防滲漏，換料
清洗方便。經特殊工藝處理的浸漬
部件和空氣腔，可承受惡劣工作環
境。
The structure is anti-corrosion,anti-leakage and
easy to be cleaned and color-changed. Dipped
parts and air cavity after the special process
treatment can endure risk in the bad operation
environment.
外部結構堅固
Compact External Structure
所有排放口采用一個公共端可防止室內的汽化液體侵蝕空氣馬達
的密封件，便于貯槽加載或者卸載操作的空轉。
All the drain outlet uses one common port that can prevent internal vapor form
corroded by sealed element of air motor and it is good to idle function during the
operation of loading or unloading storage tank.
給予保護的排放口
Protected Drain Outlet
獨特精密的空氣閥
Unique-patent Air Valve
可提供外殼材料包括：不銹鋼、鑄
鋼、聚丙烯、鋁合金等。
The case material provided includes stainless
steel, cast steel, polypropylene,aluminum alloy
and so on.
隔膜可緊緊鎖定在位，可起到
積極液封作用的成形壓條。
Diaphragm could be tightly located and it
causes positive liquid sealing effect in
pressure-stip forming.
夾持可靠的隔膜板能消除滲漏和脫
落現象，避免產生昂貴的停工停產
費用。
Clamping reliable diaphragm plate can
eliminate any leakge and drop and avoid
expensive stop operation time.
不銹鋼的閥桿具有更長的使用
壽命在潮濕空氣中仍具有備良
好的抗腐蝕功能。
The stainless valve rod has a longer
working lift and it has a good anti-corrosion
function even in humid air condition.
各類閥座和閥球選項可確保流體的相溶性
和可靠的封密從而具有極高的效率，長效
的使用壽命和更佳的吸升高度。
Various selections of valve seats and valve balls can
ensure the fluid compatibility and reliable sealing which
can improve efficiency,long working life and suction lift.
螺栓連接的，自定位的空氣和流體單位。
Bolt connected, self-positioning air and fluid parts.
流體的相溶性
Fluid Compatibility
合理的密封設計
Reasonable Sealed Design
重型隔膜板
Heavy Diaphragm Plate
長效的閥桿設計
Long-effect Value Rod Design
便于定位
Easy to position
彈性材料的選擇
Selection of Elastic Material
007c.com & gemobeng.com
邊鋒機械集團有限公司
