2017.5③ 1

Top & Bottom contact improves the design flexibility

Tapers on all 4 inner walls

Product length : L=0.5(N-1)+2.5

*N : Number of positions

Depth : 3.8mm

Height : 1.0mm

●FH34SRJ Differential Impedance

130ps rise time（20-80％）

●Top/Bottom Contact

●Smooth FPC / FFC insertion

120

115

110

105

TG100

R / TDT / Z 95

85

80

0 0.5 1

Time(ns)

1.5 2 2.5

90

connector FPC

S11

Spec

■Features

1. Low-profile

With the 1.0mm above the board and width of 3.8mm

the connectors are used in space saving applications.

2. Increased FPC/FFC retention

As compared with existing similar construction

connectors :

* In horizontal direction : Approximately 2.6 times higher

* In vertical direction : Approximately 2 times higher

3. Unique Back-Flip rotating actuator

The rotating actuator opens from the back of the

connector, assuring reliable electrical and mechanical

connection.

4. Easy FPC insertion and reliable electrical

connection

Proven Flip Lock actuator allows easy insertion of

FPC and provides a tactile sensation when fully

closed, confirming complete electrical and mechanical

connection.

5. Delivered with the actuator open

FPC/FPC can be immediately inserted without the

need for the opening of the actuator.

6. Accepts standard FPC thickness

0.3mm thick standard Flexible Printed Circuit (FPC)

can be used. This is the only ultra-low profile ZIF

connector using standard FPC.

7. Conductive traces on the PCB can

run under the connector

No exposed contacts on the bottom of the connector.

8.Halogen-free*

*As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum,

Cl + Br combined-1,500ppm maximum

9. Board placement with automatic

equipment

Flat upper surface and tape and reel packaging

facilitate vacuum pick-up and placement.

Standard reel packaging contains 5000 connectors.

Fig.1

Fig.2

Fig.3

Fig.4

●3.8mm Depth

HRS廣瀨HIROSE原廠辦事處授權(quán)一級(jí)代理分銷經(jīng)銷通路供應(yīng)商KOYUELEC光與電子，電話075582542001，82574660謝謝惠顧~

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip

Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34SRJ Series

In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

Jul.1.2

018

C

opyright 2

018

HIR

O

S

E

ELE

C

T

RIC

C

O., LT

D. All Rights R

eserv

ed.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

2

■Product Specifications

Ratings Current rating 0.5A (Note 1)

Voltage rating 50Vrms AC

Operating temperature range :

-55 to +85°C (Note 2)

Operating humidity range :

Relative humidity 90% max. (No condensation)

Storage temperature range :

-10 to +50°C (Note 3)

Storage humidity range :

Relative humidity 90% max. (No condensation)

Recommended FPC/FFC Thickness : 0.3 ± 0.03 mm, Gold plated contact pads

Item Specification Conditions

1. Insulation resistance 500M? min. 100V DC

2. Withstanding voltage No flashover or insulation breakdown 250Vrms AC / 1 minute

3. Contact resistance 100m? max.

* Including FPC and FFC conductor resistance 1mA, AC / DC 20mV max (AC : 1kHz)

4. Durability Contact resistance : 100m? max.

No damage, cracks, or parts dislocation 20cycles

5. Vibration

No electrical discontinuity of 1μs or longer

Contact resistance : 100m? max.

No damage, cracks, or parts dislocation

Frequency : 10 to 55 Hz, single amplitude of 0.75

mm, 10 cycles in each of the 3 axis

6. Shock

No electrical discontinuity of 1μs or longer

Contact resistance : 100m? max.

No damage, cracks, or parts dislocation

Acceleration of 981m/s2

, 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis

7. Humidity (Steady state)

Contact resistance : 100m? max.

Insulation resistance : 50M? min.

No damage, cracks, or parts dislocation

96 hours at 40°C and humidity of 90 to 95%

8. Temperature cycle

Contact resistance : 100m? max.

Insulation resistance : 50M? min.

No damage, cracks, or parts dislocation

Temperature : -55°C / +15°C to +35°C / +85°C / +15°C to +35°C

Time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles

9. Resistance to soldering heat No deformation of components affecting performance Reflow : At the recommended temperature profile

Manual soldering: 350°C ±10°C for 5 seconds (Note 3)

Note1 : When passing the current through all of the contacts, use 70% of the rated current.

Note2 : Includes temperature rise caused by current flow.

Note3 : The term \"storage\" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,

shipment or during transportation after board mounting.

■Materials / Finish

Part Material Finish Remarks

Insulator

LCP Color : Gray

PA UL94V-0

Color : Black

LCP(8pos.)

Contacts Phosphor bronze Gold plating with nickel barrier ???

Metalfittings Phosphor bronze Pure tin reflow plating ???

■Product Number Structure

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

FH 34S RJ ? 30S ? 0.5 SH (50)

? ? ? ? ?? ?

? Series name : FH ? Contact pitch : 0.5mm

? Series No. : 34S ? Termination type

? SH : SMT horizontal mounting type RJ ： Top and Bottom contact, halogen-free

(Flame retardance UL94V-0). ? Specifications

(50)… Standard product 5,000 pcs/reel ? Number of Contacts : 4 to 50 (99)… 500 pcs/reel

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

3

×Number of contacts

Contact No.1

Number of contacts indicator Cav No. HRS mark Polarization Mark

Lot No.

■Connector Dimensions

Unit : mm

Part No. HRS No. No. of Contacts ABCD

FH34SRJ-4S-0.5SH(50) 580-1238-7 50 4 4 1.5 2.53 3.38

FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 4.5 2 3.03 3.88

FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 5 2.5 3.53 4.38

FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 5.5 3 4.03 4.88

FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 6 3.5 4.53 5.38

FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 6.5 4 5.03 5.88

FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 7 4.5 5.53 6.38

FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 7.5 5 6.03 6.88

FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12 8 5.5 6.53 7.38

FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 9 6.5 7.53 8.38

FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 10 7.5 8.57 9.38

FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 11 8.5 9.57 10.38

FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 12 9.5 10.57 11.38

FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 13 10.5 11.57 12.38

FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 14 11.5 12.57 13.38

FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 15 12.5 13.57 14.38

FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30 17 14.5 15.57 16.38

FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34 19 16.5 17.53 18.38

FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40 22 19.5 20.53 21.38

FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 24.5 22 23.03 23.88

FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50 27 24.5 25.53 26.38

Tape and reel packaging.

Order by number of reels.

(2.9)

(0.5)

(3.8)

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.

Note 2 : Packaged on tape and reel only. Check packaging specification.

Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue. Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

4

Recommended PCB Mounting Pattern

B

X

0.3±0.05

0.065

nX

0.1X

Contact No.1

Connector image : underside

（0.25）

（0.25）

（2.9）

（0.15）

（0.15）

（0.185）

0.5

E±0.1 0.8±0.05 0.8±0.05 3.3±0.05

F±0.1

□Recommended FPC/FFC Dimensions

Unit : mm

Part No. HRS No. No. of Contacts BEFG

FH34SRJ-4S-0.5SH(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5

FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 2 3.6 4.4 3

FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5

FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 3 4.6 5.4 4

FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5

FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 4 5.6 6.4 5

FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5

FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 5 6.6 7.4 6

FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5

FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5

FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5

FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5

FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5

FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5

FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5

FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5

FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5

FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5

FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5

FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 22 23.6 24.4 23

FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5

nX Contact No.1(Top contact) (Uncovered area)

B

0.5±0.07

G±0.05

0.5±0.07

R0.2±0.1

0.5 0.3±0.03 0.3±0.03

0.03Z

Z

Contact No.1(Bottom contact)

1.5±0.3

2.5±0.3(Stiffener)

P

nX

PCB mounting

pattern image

0.25±0.03 0.65±0.03

3.3±0.03

0.8±0.03

E±0.03

F±0.03

0.5

B

Y

0.03 Y

Recommended Stencil Pattern (Recommended Stencil

Thickness : t=0.1mm)

Note 1 : Dimension P shall be 0.5mm min.

Note 2 : The recommended FPC pattern above has been designed only for FH34SRJ series.

When using the FPC for FH19SC series (lower contact), uncoverd area shall be 2.5±0.3mm and stiffener shall be

3.5mm min.

□Recommended PCB mounting pattern and metal mask dimensions

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

5

□Recommended FPC construction

1. Using Single-sided FPC FPC : Flexible Printed Circuit

FPC : Flexible Printed Circuit

Material Name Material Material Thickness

(μm)

2. Using Double-sided FPC

1. This specification is a recommendation for the construction of the FH34SRJ Series FPC and FFC (t=0.3 ± 0.03).

2. For details about the construction, please contact the FPC/FFC manufacturers.

* To prevent release of the FPC due to its bending, use of the double

sided FPC with copper foil on the back side is not recommended.

Covering film layer

Cover adhesive

Polyimide 1 mil thick （25）

（25）

Material Name Material Material Thickness

(μm)

3. Using FFC FFC : Flexible Flat Cable

* tolerance of ±20μm.

Material Name Material Material Thickness

(μm)

● Contact FPC manufacturer for specific details.

Surface treatment 0.2μm thick gold plated over 1

to 5μm thick nickel underplating 3

Copper foil

Base adhesive

Base film

Reinforcement material adhesive

Stiffener

Cu 1oz

Thermosetting adhesive

Polyimide 1 mil thick

Thermosetting adhesive

Polyimide 7 mil thick

35

25

25

35

175

Total 298

Polyester film

Adhesive Thermoplastic polyester

(12)

(30)

35

30

12

30

188

295

Gold plated annealed copper foil

Adhesive

Polyester

Adhesive

Stiffener

Polyester

Polyester

Polyester

Total

(25)

(25)

Covering layer film

Cover adhesive

Polyimide 1 mil thick

Surface treatment 0.2μm thick gold plated over 1

to 5μm thick nickel underplating 3

Through-hole copper

Copper foil

Base adhesive

Base film

Base adhesive

Cu

Cu 1/2oz

Thermosetting adhesive

Polyimide 1 mil thick

15

18

18

25

18

Copper foil

Cover adhesive

Covering film layer

Reinforcement material adhesive

Stiffener

Cu 1/2oz

Thermosetting adhesive

Polyimide 1 mil thick

Thermosetting adhesive

Polyimide 4 mil thick

(18)

25

25

50

100

Total 297 Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

6

400mm MIN(Leader)

100mm MIN

(Empty)

1600mm MIN

(Trailer?Empty)

Embossed carrier tape Top cover tape

Direction of unreeling

(L : Inside)

（?13）

(M : Outside)

（?380）

（?80）

24mm MAX

Direction of unreeling

4±0.1

1.95 8±0.1

?1.5+0.1

0 1.75±0.1 J±0.1 H±0.3

（2）

（0.3）

32mm MIN

4±0.1

8±0.1

?1.5 +0.1

0 1.7 +0.15

0

（2）

（0.3）

1.95 1.75±0.1 J±0.1 K±0.1 H±0.3

Direction of unreeling

1.5+0.1

0

□Packaging Specification

● Reel Dimensions

● Embossed Carrier Tape Dimensions

(Tape width 24mm max.)

● Embossed Carrier Tape Dimensions

(Tape width 32mm min.)

Unit : mm

Part No. HRS No. No. of Contacts HJKLM

FH34SRJ-4S-0.5SH(50) 580-1238-7 50 4

16 7.5

?

17.4 21.4

FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 ?

FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 ?

FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 ?

FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 ?

FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 ?

FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 ?

FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 ?

FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12

24 11.5

?

25.4 29.4

FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 ?

FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 ?

FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 ?

FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 ?

FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 ?

FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 ?

FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 ?

FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30

32 14.2 28.4 33.4 37.4

FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34

FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40

FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 44 20.2 40.4 45.4 49.4

FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

7

MAX 250?

Start

Temperature(?)

Time (Seconds)

25? (60 sec.) 90 to 120 sec. (60 sec.)

Preheating Soldering 0

50

100

150 150?

200?

230?

200

250

HRS test condition

Solder method : Reflow, IR/hot air

Environment : Room air

Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.'s Part

Number:

M705-221CM5-42-10.5)

Test board : Glass epoxy

18.3mm∞32.85mm∞0.8mm thick

Land dimensions : 0.3mm∞0.8mm

Metal mask : 0.25∞0.65∞0.1mm thick

The temperature profiles shown are based on the above

conditions.

In individual applications the actual temperature may

vary, depending on solder paste type, volume / thickness

and board size / thickness. Consult your solder paste and

equipment manufacturer for specific recommendations.

□Temperature Profile

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

8

Actuator open Actuator close

PCB PCB

FPC FPC

□Operation and Precautions

Operation

1. As delivered

2. FPC/FFC insertion

3. FPC/FFC insertion (The top contact specification)

Delivered with the actuator open. There is no need to

operate the actuator prior to inserting the FPC/FFC.

［Precautions］

? Do not close the actuator without the FPC/FPC

inserted.

Be sure that the FPC is parallel to the surface of the PCB, then completely insert into the connector.

［Caution］

? Do not attempt to insert the FPC if actuator is closed.

? If the actuator is closed and if the FPC is twisted during insertion, it can cause contact deformation

and / or contact failure.

Proper insertion Skewed insertion Shallow insertion

? Insert the FPC/FFC with the conductive surfaces facing up.

Align the FPC/FFC straight with the connector and insert it firmly all the way.

Caution : Handle connectors carefully, as they are very small and thin.

Please refer to this section for verification of the following points:

?

The actuator packaged in the open condition.

Boundary of FPC pattern

Edge of housing opening

?

Exercise care when handling connectors. Follow recommendations given below.

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

9

Operation

Do not press

down on the

actuator or

housing

Lift at the center

Do not rotate

the actuator by

the ends

Flip actuator up to open

Do not apply force to the actuator in the

direction shown when it is fully open.

Opening to an angle greater than 90°C

will break or damage the connector.

Lift at the center

Do not rotate

the actuator by

the ends

4. Locking

5. FPC/FFC removal (Lock release)

? After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.

? Carefully rotate the actuator up to 90°, lifting it at the center.

* This connector uses a back flip type structure. The insert direction of the FPC and the actuator are different

from front flip type connectors.

Do not to try to open the actuator from the FPC side.

□Operation and Precautions

Rotate Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

10

FPC

FPC

Stiffener film

PCB

PCB

Component part Stiffener film

PCB

Operation

6. FPC routing

? FPC should be routed in a manner that no strain or load is exerted onto the FPC. Placing any strain on the

FPC may result in unintentional disconnect or damage to the FPC, which can lead to issues such as contact

failure.

［Caution］

? Do not allow the FPC or stiffener to touch the casings, housings or any other items.

? When routing the FPC, make sure that no strain or load is applied to the connector in a pulling, pushing or

side-to-side motion. Additionally, make sure that no excessive upward or downward force is applied to the

connector.

? When routing the FPC, make sure that there is a stress free path for the FPC and the stiffener is parallel to

the PCB. Observe correct bend radiuses.

? Do not place or mount any parts that will interfere with the FPC routing.

□Operation and Precautions

e FPC routing. Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

11

□Operation and Precautions

Precautions when mounting connectors on the PCB

SHandling before mounting on PCB

Insertion of the FPC/FFC or operation of the actuator prior to mounting on the PCB is not recommended.

S PC board warpage

Minimize the warpage as much as possible. The connector are straight within 0.1 mm max. Make sure that

the mounting area flatness can accept the connector terminals without causing any failure of the solder joints.

SForces on the board

SWhen braking the large PC board into individual boards exercise care not to damage the installed

connectors.

SWhen attaching the boards or other components with the screws make sure that any stresses will not cause

board deflections affecting the mounting areas of the connector.

SWhen hand soldering:

· Do not perform hand soldering with the FPC inserted in the connector.

* Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.

* Do not use excessive amount of solder or flux compounds.

Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.

Connectors

PCB Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH34SRJ Series●0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

12 The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 05/2017. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

?

USA:

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253,

Livonia, MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810

Phone : +1-978-662-5255

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515

Phone : +1-630-282-6700

http://www.hirose.com/us/

CHINA:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

KOREA:

HIROSE KOREA CO.,LTD.

250, Huimanggongwon-ro, Siheung-si,

Gyeonggi-do, Korea, 15083

Phone : +82-31-496-7000 or 7124

Fax : +82-31-496-7100

http://www.hirose.co.kr/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern

Phone : +49-711-456002-1

Fax : +49-711-456002-299

http://www.hirose.com/eu/

FRANCE:

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

Regus La Garenne Colombes,Place de La Belgique,

71 Boulevard National La Garenne Colombes, 92250, France

Phone : +33 (0) 1 7082 3170

Fax : +33 (1) 7082 3101

http://www.hirose.com/eu/

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

18, Enterprise Center Tower 2, 209# Gong He

Road, Jing’an District, Shanghai, CHINA 200070

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose.com/cn/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/cn/

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/hk/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C,

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

10 Anson Road #26-16, International Plaza

079903, Singapore

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose.com/sg/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

MALAYSIA:

PENANG REPRESENTATIVE OFFICE

1-21-01, Suntech @ Penang Cybercity (1164), Lintang

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

http://www.hirose.com/sg/

THAILAND:

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/

Jul.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Powered by TCPDF (www.tcpdf.org)